---
title: "Memory Drum, 1970"
url: "https://americanprecision.org/learning-resources/memory-drum-1970/"
language: "en-US"
updated: "2021-10-05T15:49:57+00:00"
---

# Memory Drum, 1970

Vermont Research Corporation used a gear shaper to cut extremely fine teeth into the edge of an aluminum disc. (We have probably the only cutter still in existence.) The “gear” teeth were filled with a magnetic substance and the tops of the teeth ground down so that the magnetic material had a little separation between the units. A magnetic reader would take note of what was passing by.

This drum – inside the housing – is 18 inches in diameter, 117 Volts, 60HZ, 3527 RPM, and 32 tracks.

Canada’s museum of science and innovation, [the Ingenium,](https://ingeniumcanada.org/ingenium/collection-research/collection-item.php?id=2003.0652.001) has a later model that apparently stores 500 KB. For reference, this desktop computer stores 237 GB, which is 237,000,000 KB.

*Click the pictures to enlarge them, then hit the ‘back’ button to go back to this page.*

[![](https://americanprecision.org/wp-content/uploads/2021/10/09119129a-150x150.jpg)](https://americanprecision.org/wp-content/uploads/2021/10/09119129a.jpg)

*Drum with housing*

[![](https://americanprecision.org/wp-content/uploads/2021/10/09119129a-5-150x150.jpg)](https://americanprecision.org/wp-content/uploads/2021/10/09119129a-5.jpg)

*Front view of drum*

[![](https://americanprecision.org/wp-content/uploads/2021/10/09119129a-6-150x150.jpg)](https://americanprecision.org/wp-content/uploads/2021/10/09119129a-6.jpg)

*rear view*

[![](https://americanprecision.org/wp-content/uploads/2021/10/09119129a-3-150x150.jpg)](https://americanprecision.org/wp-content/uploads/2021/10/09119129a-3.jpg)

*Ports*

[![](https://americanprecision.org/wp-content/uploads/2021/10/09119129a-4-150x150.jpg)](https://americanprecision.org/wp-content/uploads/2021/10/09119129a-4.jpg)

*Specifications and serial*
